欢迎光临瑞昌明盛进出口贸易有限公司官网!
主营业务|产品PLC系统 DCS系统 伺服系统 机器人系统(模块 备件)
全国咨询热线:191-0706-6746
联系我们
瑞昌明盛进出口贸易有限公司
手机:19107066746
QQ:2268152223
邮箱:2268152223@qq.com
地址 :江西省九江市瑞昌市乐园乡兴乐街132号
联系人:柯经理
您的位置: 首页>>产品展示 >
产品展示 》 yaskawa 》 JACP-317802模块备件使用尺寸

JACP-317802模块备件使用尺寸

型号:JACP-317802

联系人:肖经理
公司名称:瑞昌明盛进出口贸易有限公司
公司地址:厦门市思明区吕岭路1733号创想中心2009-2010单元
手机:19107066746
QQ:2268152223
邮箱:2268152223@qq.com

在FANUC-PMC-L中有两种指令:根本指令和功用指令。当规划次序程序时,运用多的是根本指令,根本指令共12条。功用指令便于机床特别运行操控的编程,功用指令有35条。
在根本指令和功用指令执行中,用一个仓库寄存器暂存逻辑操作的中心结果,仓库寄存器有9位(如图1所示),按先进后出、后进先出的原理工作。当前操作结果压入时,仓库各原状况悉数左移一位;相反地取出操作结果时仓库悉数右移一位,终压入的信号首先恢复读出。
JACP-317802模块备件使用尺寸
There are two kinds of instructions in fanuc-pmc-l: basic instructions and functional instructions. When planning the sequence procedure, the basic instructions are used most, and there are 12 basic instructions in total. The function instructions are convenient for the programming of special operation and control of the machine tool. There are 35 function instructions.
In the execution of basic instructions and function instructions, a warehouse register is used to temporarily store the central result of logical operations. The warehouse register has 9 bits (as shown in Figure 1), and works according to the principle of first in last out and last in first out. When the current operation result is pressed in, all the original conditions of the warehouse are moved to the left by one bit; On the contrary, when taking out the operation results, the warehouse moves all to the right by one bit, and the final pressed signal is first restored to be read out.
在线客服
联系方式

热线电话

19107066746

上班时间

周一到周五

公司电话

19107066746

二维码
线