标准机柜的详细说明如下。有关定制驾驶室iNet的问题，请参阅机器制造商发布的手册。
按照以下步骤对控制面板进行日常维护。
每天检查门，确保其关闭严密。控制面板的结构为防尘钢板外壳，带有垫圈门，以防止
灰尘和油雾。始终保持门紧闭。
在门打开的情况下检查控制装置后，关闭门，并使用提供的钥匙（编号）牢牢锁住门锁（每扇门两个
YE001）。打开（逆时针旋转）或关闭（顺时针旋转）时
旋转），将钥匙一直插入锁孔，然后转动直到发出咔嗒声
（大约四分之一圈）。钥匙可以从打开的或
关闭位置。
JANCD-GI-485170
Details of the standard cabinet are explained below. Questions on customized cabinets should be referred to the manual issued by the machine manufacturer.
Follow the steps below for routine daily maintenance of the control panel.
1. Inspect the door(s) daily to ensure tight closure. The control panel is constructed as a dust-proof, sheet-steel enclosure with gasketed doors to keep out
dust and oil mists. Keep the door(s) tightly closed at all times.
2. Following inspection of the control with the door open, close the door and fasten the door locks (two per door) securely using the key provided (Number
YE001). When opening (counter-clockwise rotation) or closing (clockwise
rotation), insert the key all the way into the keyhole and turn until it clicks
(approximately a quarter-turn). The key can be removed from an open or
closed position.
客服1