-XCP01-1-486185模块备件产品型号

 -XCP01-1-486185
介质温度范围 
介质     压缩空气
颗粒大小 
压缩空气中的含油量   
不可超过小控制压力，否则会导致故障电路和可能发生阀故障！
压力露点必须至少低于环境和介质温度 15 °C ，并且允许 的温度为 3 °C 。
压缩空气的油含量必须在整个使用寿命中保持不变。
只可使用经过 AVENTICS 公司许可的油。详细信息请参见文档“技术信息”（MediaCentre 中获取）。
ATEX可选：ATEX-变型可通过不带有具有ATEX-线圈的基阀组合建立。 ATEX-标志:参见ATEX-线圈目录表。
 -XCP01-1-486185
Medium temperature range
Medium compressed air
Particle size
Oil content in compressed air
Do not exceed the small control pressure, otherwise it will lead to faulty circuit and possible valve failure!
The pressure dew point must be at least 15 ° C lower than the ambient and medium temperature, and the allowable temperature is 3 ° C.
The oil content of the compressed air must remain constant throughout its service life.
Only oils approved by aventics may be used. For more information, see the documentation "technical information" (available in mediacentre).
ATEX optional: the ATEX variant can be built with a base valve combination without an ATEX coil. ATEX marking: see ATEX coil catalog table.