1C31122G01模块备件使用过程

连接是数据生成器和服务器之间的开放通信路径
网络上的数据消费者。连接包括信息
关于消费者的位置，这大大减少了数据量
开销相比之下，未连接的消息是
使用目标设备的网络地址和
目标
1C31122G01模块多支持64个双向端口
连接。这些连接可以是非计划连接和非计划连接的任意组合
预定的连接。如果应用程序需要更多连接，则
可以将其他1C31122G01模块放置在同一机箱和
与个模块相同的网络，以提供额外的连接。
重要提示：网络上实际支持的连接数
网络取决于网络配置。对于
例如，一个RPI只能支持10到12个连接
（请求的数据包间隔）为5ms，RPI为2ms时仅为4。
重要提示：如果您选择使用附加模块来提供附加功能
连接时，请确保对应用程序进行分区，以便
A connection is an open communication path between the data producer and the data consumer on the network. The connection includes information about the location of the consumer that significantly decreases the data overhead. By contrast, an unconnected message is a traditional message that uses the network address of the target device and the data address within the target. The 1756-CNB module supports a maximum of 64 bidirectional connections. These connections can be any mix of unscheduled and scheduled connections. If your application requires more connections, you can place additional 1756-CNB modules in the same chassis and on the same network as the first module to provide additional connections. Important:The number of connections that can actually be supported on a network is dependent upon the network configuration. For example, only 10 to 12 connections can be supported at an RPI (requested packet interval) of 5ms, and only 4 at an RPI of 2ms. Important:If you choose to use additional modules to provide additional connections, be sure to partition your application so that it best uses the additional modules.